VOOPOO Drag 6 Kit appears in VapeSourcing listing with 4400mAh battery
VapeSourcing's product page for the VOOPOO Drag 6 Kit describes a 4400mAh internal battery, a 5ml UFORCE-X 2 tank, PnP X coils and a 5-220W output range. The page gives no launch date, price or stock confirmation.
Key points
- VapeSourcing's product page for the VOOPOO Drag 6 Kit is dated 28 October 2026 and gives no launch date, price or stock status.
- The page lists a 5-220W output range, a GENE.TT 3.0 chipset and three modes: Smart, RBA and T-TCR.
- The listing rates the internal battery at 4400mAh in total and separately describes dual 2200mAh batteries.
- The bundled UFORCE-X 2 tank holds 5ml and ships with 0.15ohm and 0.3ohm PnP X coils.
- The page shows seven customer reviews, recommends e-liquid under 6mg/ml and describes the kit as suited to DL and RDL draws.
VapeSourcing published a product page for the VOOPOO Drag 6 Kit dated 28 October 2026, describing a 4400mAh internal battery, a 5ml tank and 5-220W output. The page gives no launch date, price or shipment timetable.
The item is a single retail listing from VapeSourcing, a vape retailer, which names VOOPOO as the brand. VapeBrief treats such a page as a lead rather than proof that the device has launched or is in stock, because the listing itself carries no confirmed release or availability date.
The listing sets a 220W ceiling and names a GENE.TT 3.0 chipset
The page states an adjustable output range of 5W to 220W and credits the GENE.TT 3.0 chipset with the control. A chipset is the circuit set that regulates a device’s output and reads coil resistance.
The listing lists three modes, Smart, RBA and T-TCR, and a 1.66-inch TFT screen showing output, battery life and two switchable themes. In Smart mode, as the page describes it, the device sets output automatically from the resistance of the installed coil; a control wheel under the atomiser allows manual adjustment instead.
The cells are internal and recharge over Type-C
The listing rates the rechargeable internal battery at 4400mAh in total and separately describes it as dual 2200mAh batteries. Charging runs through a Type-C port rated at 3A, and the page gives no charge time.
The page leaves open whether the 4400mAh total and the dual 2200mAh description refer to the same cells, and it shows no third-party test data for capacity or output. Because the cells are built in, users cannot swap them.
| Listed specification | Value | Unit |
|---|---|---|
| Maximum output | 220 | W |
| Minimum output | 5 | W |
| Battery capacity, internal | 4400 | mAh |
| Cell configuration as listed | dual 2200 | mAh |
| Tank capacity | 5 | ml |
| Mod dimensions | 96.9 × 51.4 × 23.6 | mm |
| Screen size | 1.66 | inch |
| Charging current | 3 | A |
| Recommended e-liquid strength | under 6 | mg/ml |
The box pairs a UFORCE-X 2 tank with two PnP X coils
The contents list a UFORCE-X 2 tank holding 5ml, a replacement glass tube of the same capacity and PnP X coils at 0.15ohm and 0.3ohm. The page says the kit is compatible with VOOPOO’s wider PnP X coil range.
DL means direct-lung inhalation and RDL means restricted direct-lung inhalation, the two draw styles the listing says the kit suits. The page also describes a slide top-fill design and an airflow structure it calls golden-triangle.
The page carries seven customer reviews and no test data
The listing displays seven reviews with a topic summary built from them. That summary credits three reviewers with mentioning flavour, two with battery life, two with quality and one with design, and the page presents these as customer feedback rather than independent testing.
The retailer’s editorial note says its team has covered vaping products and market research since 2014. The page also sets a 30-day return window limited to items damaged on arrival.
Retailers and coil buyers carry the uncertainty
The listing’s prompt to be notified when the kit is back in stock suggests availability was unconfirmed when the page was captured. That matters to shops weighing shelf space and to users tracking the device.
Buyers of PnP X coils and the UFORCE-X 2 tank also have an interest, since the kit ships with both coil resistances and the page names that platform. The listing does not say whether VOOPOO has announced the device publicly or whether shipments have begun.
The documents leave the release schedule open
No launch, dispatch or stock date appears on the page, and no independent check of the 4400mAh or 220W figures accompanies it.
The next verifiable point is whether VOOPOO publishes its own product page or release notice for the Drag 6 Kit, or whether VapeSourcing later adds a stock status or dispatch date.
Questions readers ask
What battery does the VOOPOO Drag 6 Kit use?
The VapeSourcing listing describes a rechargeable internal battery rated at 4400mAh in total and separately lists dual 2200mAh batteries, charged through a Type-C port rated at 3A. The page gives no charge time and shows no independent runtime test.
What coils fit the VOOPOO Drag 6 Kit?
The listing says the kit works with VOOPOO PnP X coils and the UFORCE-X 2 tank. The box includes one 0.15ohm and one 0.3ohm PnP X coil, plus a 5ml replacement glass tube and a silicone rubber pack.
Has the VOOPOO Drag 6 Kit been confirmed as launched?
The VapeSourcing page gives no launch or dispatch date, and its back-in-stock prompt suggests availability was unconfirmed when the page was captured on 28 October 2026. The listing does not say whether VOOPOO has announced the device.
What output range does the Drag 6 Kit list?
The listing states an adjustable output range of 5W to 220W, controlled by the GENE.TT 3.0 chipset, with Smart, RBA and T-TCR modes. Smart mode sets output automatically from coil resistance, and a control wheel under the atomiser allows manual adjustment.
Sources
18+ only. This site is for adult readers and provides news and information only. It is not medical, legal or purchase advice. Nicotine is addictive. Always check the official text of any regulation in your market. Health Information


